Water-based Release Agent for Carpets

Product Description

Concentrated water-based release agent for products such as automotive carpets, front enclosures, tire covers and trunk covers.

Main Properties

• Fully water-based release agent. Strong mold release ability, less mold scale accumulation.
• Fast drying, strong film adhesion.
• The resulting product has a dry surface with fine pores and a soft feel.
• Suitable for MDI system foam. If it is TDI or TDI/MDI mixed system, please check before use.
• Depending on the difficulty of the finished product, it can be diluted at different ratios according to customer requirements.

Typical Properties

Application Methods

Dilute with water until smooth; adjust ratio on-site for best results. Clean mold surface and preheat if needed. Spray evenly with proper atomization, then allow to dry completely. After demolding, clean and reapply for the next cycle.

Operation and Precautions

Personal Protection: Use rubber gloves, safety goggles, and a respirator to prevent skin and eye exposure. Keep the work area well-ventilated and clear of heat, flames, and reactive chemicals like oxidizers, strong acids, and alkalis.

Handling Guidelines: Avoid mixing with release agents of other types or brands—incompatibility may cause product failure. Shake or stir thoroughly prior to application, and continue mixing periodically during use to maintain uniformity.

Issue Resolution: In case of poor release, consider increasing the spray volume or allowing more time for drying. Should excessive buildup occur, clean the surface with solvent or a dedicated mold rinse.

Storage and Validity

Storage: Store the product in its original container, tightly sealed, in a cool, dry location away from direct sunlight and outdoor elements. Protect from freezing, as low temperatures can cause permanent damage—allow the product to warm above 15°C before use. Keep away from heat, open flames, and acidic or alkaline materials. Temperature extremes above 40°C or below -10°C should be avoided. During transportation, observe standard safety measures for chemical goods.

Shelf Life: Under proper conditions—stored in the original unopened container at 15–30°C—the product remains stable for up to 6 months.